My Actifit Report Card: December 4 2024

Welding, 3D printing, testing the used-oil stove

Dear friends,

Yesterday morning, I meditated for twenty minutes. I intended to meditate for one hour but I was interrupted to do some house chores - to prepare breakfast for the family.

Then, I printed 3D part but the part was not ok because of some warping of plastics. I found on the internet that printing ABS had some issue like warping because of the unstable temperature around the printer. And it was suggested to have an enclosure for the printer better with inner temperature stabalizing feature. Otherwise, it will keep on warping. Although printing in an enclosure still ends up in warping, it can reduce it to certain amount. So I decided to build one with temperature control and air exhaust fan. I also found out that the optimum temperature for print nozzle head and print bed are 240 °C and 90 °C respectively. Below are my 3D printing and ruined parts.

At night I tested the used oild stove that I modified in the morning. I modified the stove to be shorter in height so that more flames could come out of it. Below are my activities on modifying and testing the stove. The result is good but I think more flames should come out of it so, today, I will shorten the air pipe and test again.

https://youtube.com/shorts/lNpBhuAy7f0?feature=shared

Those are some of the activities for yesterday.

@princekham
Myanmar
4th Dec 2024

This report was published via Actifit app (Android | iOS). Check out the original version here on actifit.io

Daily Activity